Why Do Kayaks Have Holes in Them?

Kayaks have been around for centuries, and they were originally designed to be able to travel in very shallow water. The holes in the kayak allow water to pass through so that it doesn’t get stuck in the boat and cause it to capsize.

Most people don’t know that kayaks have holes in them for a very specific reason. The holes are called scupper holes, and they are there to drain water out of the kayak so that it doesn’t fill up with water and sink. Scupper holes are also used to vent air bubbles out of the kayak so that it doesn’t become unstable.

Some people think that the scupper holes are there so that you can paddle faster, but this is not the case. In fact, paddling with scupper holes can actually be slower because the water can splash back into your face. However, scupper holes can help you go faster in rough waters because they allow air to escape from under the kayak which makes it more stable.

So why do kayaks have holes in them? Scupper holes serve an important purpose in keeping your kayak afloat and stable. Next time you’re out on the water, take a closer look at your kayak and see how these little hole work to keep you safe!

Why are There Holes in My Kayak?

There are a few reasons why your kayak might have holes in it. The most common reason is that the kayak was not properly stored and something punctured it, like a sharp object or animal claw. Other reasons could be that the kayak was involved in an accident or collision, which caused it to break and develop holes.

If you notice any holes in your kayak, it’s important to take care of them right away. Otherwise, water will start seeping in and damaging the interior of the kayak. This can lead to mold and mildew growth, as well as weakening the structure of the kayak itself.

To fix holes in your kayak, you’ll need to patch them up with a waterproof sealant. You can buy special boat repair kits at most marine supply stores. Just make sure to follow the instructions carefully so that you patch up the hole correctly and completely.

Should You Plug Scupper Holes?

If your kayak has scupper holes, you may have wondered if you should plug them. The answer is: it depends. Scupper holes are designed to allow water that gets into the kayak to drain out, so that you don’t end up sitting in a puddle.

However, if the water is draining too quickly, it can make the kayak unstable and difficult to paddle. In this case, you may want to plug at least some of the scupper holes. Another time when you might want to plug scupper holes is if waves are crashing over the side of the kayak and flooding it through the scupper holes.

In general, it’s a good idea to have plugs on hand in case you need them, but whether or not you actually use them will depend on the conditions.

What are Kayak Scupper Holes For?

If you own a kayak, or are thinking about purchasing one, you may have noticed some small holes near the cockpit. These holes are called scupper holes, and they serve an important purpose. Scupper holes allow water that has accumulated in the kayak to drain out.

This is especially important in sit-on-top kayaks, as they are more likely to take on water than traditional kayaks. Scupper holes also help ventilate the inside of the kayak, preventing it from becoming too hot or humid. So, if you see some scupper holes on a kayak, now you know what they’re for!

Why Do You Need Scupper Plugs on a Kayak?

If you’ve ever been kayaking, you know that water can sometimes get into the cockpit. That’s where scupper plugs come in! Scupper plugs are designed to seal the holes in your kayak so that water can’t enter.

They’re an essential piece of gear for any kayaker, and they can help keep you dry and comfortable on your next paddling adventure.

A Guide to Scupper Plugs

Do Sit in Kayaks Have Scupper Holes

If you’re new to kayaking, you may not know what a scupper hole is. Scupper holes are small holes in the bottom of sit-in kayaks that allow water to drain out. They’re important because they help keep your kayak from filling up with water and sinking.

Some people choose to plug their scupper holes, but others leave them unplugged so that water can drain out. It’s really up to personal preference.

Do Scupper Holes Need to Be Plugged

If you have a boat, you’ve probably seen scupper holes. These are the small drains that allow water to escape from the deck of your boat. While they are necessary to keep your boat from flooding, you may be wondering if they need to be plugged.

The answer is yes and no. If you are simply sitting in your boat at the dock, there is no need to plug the scupper holes. However, if you are underway and waves are crashing against the side of your boat, it is important to plug the scupper holes so that water doesn’t come rushing in.

Some boats have built-in plugs for the scupper holes, while others require you to use your own plugs or stoppers. Either way, it is a good idea to keep a few plugs handy so that you can quickly plug the holes if necessary.

Scupper Plugs

Scupper plugs are a type of drainage plug that is inserted into the scupper holes of a kayak or canoe to prevent water from entering the vessel. Scupper plugs are made from a variety of materials, including foam, rubber, and plastic. They come in different sizes to fit various scupper hole diameters.

Scupper plugs are an essential piece of gear for kayakers and canoeists who want to keep their boat dry while out on the water. They are especially important for those who paddle in areas with large waves or rapids, as they can help prevent water from entering the boat and swamping it. Scupper plugs can also be used to keep water out of the boat while transporting it on top of a car or trailer.

If you’re new to kayaking or canoeing, you may be wondering how to insert scupper plugs into your boat. The process is actually quite simple: first, locate the scupper holes on your kayak or canoe (they will be located near the cockpit area). Next, determine what size plug is needed to fit snugly into the hole – most manufacturers will list this information on their website or in the product manual.

Once you have the right sized plug, simply insert it into the hole and push until it’s seated firmly in place. That’s it! Your kayak or canoe should now be protected from any unwanted water incursion.

Why Does My Pelican Kayak Have Holes in the Bottom

If you own a pelican kayak, you may have noticed some holes in the bottom of the hull. While this may seem strange, there’s actually a very good reason for it. These holes are called scupper holes and they serve an important purpose.

Scupper holes allow water that gets into the kayak to drain out again. This is important because it helps to keep the kayak from becoming too heavy and sinking. However, scupper holes can also let in water when waves splash over the side of the kayak.

To help prevent this, most pelican kayaks come with plugs that can be inserted into the scupper holes when not in use. So if you notice some holes in the bottom of your pelican kayak, don’t worry – they’re there for a good reason! Just be sure to plug them up when you’re not using your kayak to help keep water out.


Kayaks have been around for centuries and were originally used by the Inuit people of Greenland. The kayak is a small, narrow boat that is propelled by a double-bladed paddle. It is designed to provide stability and maneuverability in rough water conditions.

Kayaks typically have one or two seats, although some models can accommodate three or more people. Most kayaks have an opening in the center of the hull, called a cockpit, which allows the paddler to get in and out of the boat easily. The cockpit also provides a place for storage of gear and supplies.

Some kayaks also have a hatch cover over the cockpit to keep out water when swimming or capsizing. The holes in kayaks serve several purposes. They allow water to drain out of the boat quickly if it capsizes or partially fills with water.

They also provide ventilation so that the paddler does not get too hot on sunny days. Additionally, they make it easier to carry the kayak on your shoulders when portaging between bodies of water.