How to Replace a Boat Seat Pedestal?

Last Updated on October 16, 2022

When it comes time to replace your boat seat pedestal, there are a few things you need to take into consideration. The first is the type of pedestal you have. There are two main types of boat seat pedestals, swivel and fixed.

Swivel pedestals allow your seat to rotate, while fixed pedestals do not. The second thing you need to consider is the height of the new pedestal. You will want to make sure the new pedestal is the same height as the old one, or slightly taller.

Finally, you need to decide if you want a folding or non-folding Pedestal. Folding Pedestals are great for storage and easy transport, while non-folding Pedestals are more sturdy and durable.

  • Loosen the bolts that hold the seat pedestal in place using a wrench
  • Remove the old seat pedestal and set it aside
  • Place the new seat pedestal in the same location as the old one and tighten the bolts to secure it in place
  • Attach the seat to the new pedestal following any instructions that came with the new pedestal

How to Mount Boat Seat Pedestal in a Fiberglass Boat

If you’re looking to add a boat seat pedestal to your fiberglass vessel, there are a few things you’ll need to take into account. Here’s a quick guide on how to mount a boat seat pedestal in a fiberglass boat, so you can get started enjoying your new seating arrangement as soon as possible. First and foremost, it’s important to measure the area where you’ll be mounting the pedestal.

You’ll need to know the dimensions of both the base and the deck in order to ensure that the pedestal will fit properly. Once you have those measurements, mark out the location of the four holes that will need to be drilled for mounting purposes. Next, use a drill bit that is slightly smaller than the bolts that will be used for mounting in order to create pilot holes at each of the marks.

This will make it easier to insert the bolts later on. Now it’s time to begin working on attaching the base of the pedestal to the deck. In most cases, this can be done by using stainless steel screws and washers.

However, if your particular model requires something different (such as adhesive or sealant), follow those instructions instead. Once all four corners are secured, go ahead and attach any additional hardware that might be necessary (such as handles or knobs). And that’s it!

You should now have a sturdy and reliable boat seat pedestal mounted in your fiberglass vessel – enjoy!

How to Remove Stuck Boat Seat Pedestal

If you have a stuck boat seat pedestal, there are a few things you can do to remove it. First, try unscrewing the pedestal with a wrench or pliers. If that doesn’t work, you may need to use a hacksaw or other cutting tool to remove the pedestal.

Be sure to wear safety goggles and gloves when using any cutting tools. Once the pedestal is removed, you should be able to easily lift out the stuck seat.

How to Mount Boat Seat Pedestal in an Aluminum Boat

If you’re looking to add a boat seat pedestal to your aluminum boat, there are a few things you need to know first. With a little bit of planning and the right tools, mounting a boat seat pedestal in an aluminum boat is relatively easy. Before you start, it’s important to measure the space where you’ll be mounting the pedestal.

This will ensure that the pedestal is properly positioned and secure. It’s also a good idea to mark the center of the hole that will be drilled for the mounting screws.

How to Replace Boat Seat Pedestal Bushing

If your boat’s seat pedestal is worn out, it’s time to replace the bushing. Here’s how: 1. Remove the old bushing.

This may require some prying with a screwdriver. 2. Cut a new bushing from a piece of rubber or plastic (you can find this at most hardware stores). Make sure it’s the same size as the old one.

3. Slide the new bushing onto the seat pedestal. Make sure it fits snugly. 4. That’s it!

Your boat’s seat pedestal should now be good as new.

Boat Seat Pedestal Types

There are many different types of boat seat pedestals on the market, and it can be difficult to know which one is right for your needs. Here is a quick guide to the most popular types of boat seat pedestals to help you make the best decision for your vessel. 1. Fixed Pedestal: A fixed pedestal is exactly what it sounds like – it is permanently affixed to the floor of the boat and cannot be removed.

This type of pedestal is great for boats that do not need to be stored away often, as they can be quite heavy and difficult to move. However, fixed pedestals offer very little adjustability in terms of height or angle, so they may not be ideal for everyone. 2. Swivel Pedestal: A swivel pedestal allows the seat to rotate 360 degrees, making it much more versatile than a fixed pedestal.

This type of pedestal is perfect for boats that are used for fishing or other activities where 360-degree mobility is important. Swivel pedestals are also generally more lightweight and easier to remove than fixedpedestals, making them a good choice for storage purposes. 3. Adjustable Pedestal: An adjustable pedestal offers the best of both worlds – it can be easily removed when necessary, but also offers height and angle adjustability so that you can customize your seating position to your own preferences.

This type of pedalstool is ideal if you frequently switch between different activities on your boat or simply want maximum comfort while seated.

How Do You Measure a Boat Seat Pedestal?

A boat seat pedestal is typically made of metal or plastic and is used to support a swivel chair on a boat. The most important dimension when measuring a boat seat pedestal is the height, as this will determine how comfortable you can be while sitting in the chair. To measure the height of a boat seat pedestal, simply use a tape measurer or ruler to find the distance from the top of the pedestal to the bottom.

How Do I Remove a Stuck Boat Pedestal?

If your boat’s pedestal is stuck, there are a few things you can try to remove it. First, try gently tapping the pedestal with a rubber mallet. If that doesn’t work, you can try using a pry bar to loosen the pedestal.

If neither of these methods work, you may need to cut the pedestal off. To do this, first turn off the power to the boat and then use a sawzall or other cutting tool to cut through the pedestal. Once you’ve removed the pedestal, you can install a new one by following the instructions in your boat’s manual.

How Do You Attach a Swivel to a Boat Seat?

If you’re looking to add a swivel to your boat seat, there are a few things you’ll need to take into consideration. First, you’ll need to decide what type of swivel you want. There are two main types – those that mount directly to the floor and those that mount to the seat itself.

Each has its own set of pros and cons that you’ll need to weigh before making a decision. Once you’ve decided on a type, it’s time to start thinking about installation. If you’re handy with tools, mounting a swivel shouldn’t be too difficult – but if not, it’s probably best to leave it to a professional.

Whichever route you choose, make sure all the bolts are tightened properly and double check that everything is secure before using your new swivel seat!

How Do You Remove a Boat Seat?

Assuming you want to remove a boat seat for the purposes of reupholstering it: First, you’ll need to remove any screws or bolts that are holding the seat in place. Once those are removed, the seat should be able to lift up and off of the boat.

If it’s stuck, you may need to use a putty knife or another flat tool to pry it loose. Once the seat is off, you can start working on removing the old fabric. This will involve carefully taking apart any seams that were holding the fabric in place.

You may need to use a seam ripper or sharp scissors for this step. Once all of the fabric is removed, you can start measuring and cutting new fabric pieces to fit your seat. After your new fabric is cut out, you’ll need to attach it to the seat using either glue or staples (or both).

Start by attaching one side of the fabric and then pulling it tight before attaching the other side. Once both sides are attached, you can move on to attaching any piping or trim that you want to use. Finally, reattach your newly upholstered seat back onto your boat!

SCBX16 Pedestal seat installation tutorial


In this blog post, the author gives a step-by-step guide on how to replace a boat seat pedestal. The first step is to remove the old pedestal by unscrewing it from the deck. Next, measure the hole left behind and cut a new piece of plywood to fit.

Attach the new plywood to the deck with screws and then screw in the new pedestal. Finally, reattach the seat to the new pedestal and enjoy your newly replaced boat seat!