How to Mount Swivel Seats in a Jon Boat?

Last Updated on October 16, 2022

To mount a swivel seat in a jon boat, first remove the old seat. Next, measure the distance between the front and back bolts on the base of the new seat. Cut two pieces of plywood to this measurement, and then drill holes in the plywood that align with the holes in the base of the seat.

Place these pieces of plywood on either side of the hole in the floor of the jon boat, and then bolt them down using washers and nuts. Finally, screw the seat onto its base and enjoy your new swivel chair!

Tinny Seat & Swivel Mounts – How To Install Your Boat Seat.

  • Using a tape measure, find the center of the swivel seat and mark it with a pencil
  • Center the seat on the boat and trace around the base of the seat
  • Cut out the traced circle with a jigsaw or power drill fitted with a hole saw attachment
  • Coat the underside of the seat base with marine-grade adhesive sealant and press it into place on top of the cutout hole
  • Allow the sealant to cure for 24 hours before proceeding to step 5
  • 5
  • Insert bolts through holes in bottom of swivel chair and screw into place underneath boat flooring, using washers and nuts to secure in place if necessary

How to Mount Boat Seat to Aluminum Boat

If you’re looking to add a boat seat to your aluminum boat, there are a few things you’ll need to do to ensure it’s properly mounted. Here’s a step-by-step guide on how to mount a boat seat to an aluminum boat: 1. Start by cleaning the area where the seat will be mounted with soap and water.

This will help the adhesive bond better. 2. Next, measure and mark the location of the holes for the mounting bolts. Drill pilot holes at these marks.

3. Now it’s time to apply the adhesive bonding agent to both the seat and the aluminum boat surface. Be sure to follow the manufacturer’s instructions for best results. 4. Position the seat in place and then insert and hand-tighten the mounting bolts through the pilot holes.

Again, be sure to follow any manufacturers’ guidelines during this process. 5 Allow 24 hours for everything to cure before using your new setup!

Quick Release Boat Seat Swivel

A boat seat swivel is a device that allows a person to rotate their boat seat in any direction. This can be extremely useful for someone who wants to be able to move their seat around easily, or for someone who wants to be able to get in and out of their boat without having to remove their seat. There are many different types of quick release boat seat swivels on the market, and they come in a variety of different sizes and styles.

One type of quick release boat seat swivel is the spring-loaded type. This type of swivel has a spring inside that helps to keep the seat in place. The downside to this type of swivel is that it can sometimes become loose over time, which can cause the seat to wobble around.

Another type of quick release boat seat swivel is the friction-fit type. This type of swivel fits snugly into place and uses friction to stay in place. This can be a good option for someone who wants a more secure fit, but it can also make it more difficult to remove the seat when necessary.

Boat Seat Swivel Mount

Boat seat swivel mounts are an important part of any boater’s arsenal. They allow you to rotate your boat seat to face any direction, making it easier to get in and out of your boat. Swivel mounts also make it possible to adjust your seating position while underway, so you can always be comfortable.

There are a few things to keep in mind when choosing a boat seat swivel mount. First, you’ll need to decide what type of mount you want. There are flush-mounts and surface-mounts.

Flush-mounts are installed below the deck level and offer a sleek look. Surface-mounts sit on top of the deck and may be more visible, but they’re usually less expensive. Next, you’ll need to choose the right size mount for your boat seat.

Make sure to measure the distance between the holes in your boat seat base before purchasing a mount. Most mounts are designed for standard sized boat seats, but there are some that accommodate larger or smaller seats. Finally, pay attention to the weight capacity of the mount you select.

Some models have higher weight capacities than others. This is especially important if you plan on using your swivel mount with a heavy duty fishing chair or other large piece of equipment. Installing a boat seat swivel mount is typically a straightforward process.

Attwood Quick Disconnect Seat Mount

If you’ve ever been out on a boat, you know that there are a lot of things that can happen. That’s why it’s important to have a seat that you can trust. The Attwood Quick Disconnect Seat Mount is a great option for anyone who wants a reliable and comfortable seat.

This seat mount is made from high-quality materials, so you can be sure that it will last. It’s also easy to install, so you won’t have to spend hours trying to figure it out. And if you ever need to remove it, the quick disconnect feature makes it easy to do so.

The Attwood Quick Disconnect Seat Mount is a great choice for anyone who wants a reliable and comfortable seat on their boat.

How to Add Seats to a Boat

Most boats have seating for only a few people, but sometimes you need to accommodate more. Whether you’re hosting a party or taking the family out for a day on the water, adding seats to your boat is a great way to make sure everyone has a comfortable place to sit. Here’s how to do it:

1. Decide where you want the new seats to go. You’ll need to leave enough space for people to walk around, so keep that in mind when choosing your location. 2. Remove any existing seats in that area.

If there are screws holding them down, remove those first. 3. Measure the area where the new seats will go and cut pieces of plywood or another material to use as seat bases. Make sure they’re sturdy enough to support people sitting on them!

4. Attach the seat bases to the floor of your boat using screws or bolts. Again, make sure they’re secure so nobody falls through. 5. Cover the seat bases with foam padding and then fabric of your choice.

You can use marine-grade vinyl for durability, or opt for something softer if you prefer. Sew or staple the fabric in place and trim off any excess material . . . and that’s it!

How Do You Mount a Boat Swivel Seat?

If you’re looking to add a boat swivel seat to your vessel, there are a few things you’ll need to take into account before making your purchase. For starters, you’ll need to decide which type of swivel seat mount is best suited for your boat. There are three basic types of mounts: deck mounts, side mounts and pedestal mounts.

Deck mounts are the most popular type of mount for boat swivel seats. They’re easy to install and offer a high degree of adjustability. Side mounts are also popular, but they can be more difficult to install and may not offer as much adjustability.

Pedestal mounts are the least popular option, but they offer the most stability and are often the easiest to install. Once you’ve decided on the type of mount, you’ll need to take measurements of your boat’s seating area so that you can purchase a seat that will fit properly. You’ll also want to consider the weight capacity of the seat and make sure that it’s rated for use in marine environments.

When you have all of these factors sorted out, it’s time to install your new boat swivel seat! If you’re working with a deck mount, start by attaching the base plate to your desired location on the deck using lag screws or through-bolts. Then, attach the swivel plate to the baseplate using machine screws.

Make sure that everything is tight and secure before moving on. For side-mount installations, start by attaching one bracket (usually included with the seat)to each side rail using lag screws or U-bolts. Next, position the swivel plate over the brackets and attach it using machine screws.

Once again, make sure everything is tight before moving on. Pedestal-mount seats are installed similarly to side-mounts, but instead of attaching brackets directly tothe side rails, they’re attachedto an existing pedestal base or footrest . Once again ,lag screws or U – boltsare usedfor attachment .

Positiontheseat overthebracketsandattachitwithmachinescrewsbeforetighteningeverythingdown . In any case , onceyourseatisinstalled ,youcanenjoythe increased comfortandconvenienceof havinga 360 -degree rangeofmotionwhile seatedonyourboat !

How Do You Attach a Seat to a Jon Boat?

If you’re looking to add a seat to your jon boat, there are a few things you’ll need to do. First, you’ll need to measure the width of the seat and the height of the backrest. Next, you’ll need to mark the centerline of the seat on both the front and back of the boat.

Once you have your measurements and centerlines marked, you can start attaching the seat. To attach the seat, you’ll need 4 bolts, washers, and nuts. Start by attaching two bolts through the front of the boat at the centerline mark.

Then, do the same for the back of the boat. Once both bolts are in place, slide on two washers followed by two nuts. Be sure to tighten each nut until it is snug against both washers – this will help keep your seat from wobbling or becoming loose over time.

And that’s it! You should now have a sturdy seat attached to your jon boat that will provide a comfortable place to sit while out onthe water.

What Size Screws Go in a Boat Seat?

There is no definitive answer to this question as it will depend on the make and model of your boat seat. However, as a general rule of thumb, you should use screws that are long enough to go through the thickness of the seat material and into the frame or supports beneath. This will ensure a secure fixing that will withstand any bumps or jolts whilst out on the water.

It is also worth considering using marine-grade screws as these are designed to resist corrosion from salt water and harsh weather conditions.

How Do I Add More Seats to My Boat?

If you’re looking to add more seats to your boat, there are a few things you’ll need to take into consideration. First, you’ll need to decide what type of seating arrangement you want. Do you want bench seats that run along the sides of the boat?

Or do you want individual chairs that can be moved around? Once you’ve decided on the type of seating, you’ll need to measure the space in your boat to make sure the new seats will fit. You’ll also need to consider how many people you want to be able to seat comfortably and whether or not you want storage space beneath the seats.

If you’re handy with tools, adding new seats to your boat can be a relatively easy project. But if you’re not comfortable working with tools, it’s probably best to leave this job to a professional. Either way, once your new seats are installed, they’ll provide years of comfort and enjoyment on the water!


If you’re looking to add swivel seats to your jon boat, there are a few things you need to keep in mind. First, you’ll need to decide where you want the seats to be mounted. Second, you’ll need to make sure the seats are securely mounted so they don’t come loose while you’re out on the water.

And finally, you’ll want to make sure the seats are comfortable and positioned in a way that makes it easy for you to get in and out of the boat. To start, determine where you want the swivel seats to be located in your jon boat. You’ll likely want them near the front or back of the boat so you can easily get in and out.

Once you’ve decided on their location, use a drill to create pilot holes for the bolts that will secure the seats. Next, insert the bolts through the bottom of the seat base and into the pilot holes. Finally, tighten everything down with nuts and washers until everything is snug and secure.

Now that your swivel seats are installed, it’s time to enjoy some time out on the water!