How to Load a Kayak on J Rack?

Last Updated on October 1, 2022

Have you ever tried loading a kayak onto a J rack and found it difficult? You’re not alone. Most people have no idea how to load a kayak onto this type of rack.

If you have a J rack and want to load a kayak, there are a few things you need to do.

Make sure that the straps on the rack are tightened, Position the kayak so that it is perpendicular to the car, with the front of the kayak facing the front of the car. Finally, secure the kayak by tying it down with straps or rope.

In this blog post, we will show you how to do it correctly. With a little practice, you’ll be able to load your kayak quickly and easily.

Let’s get started!

How to PROPERLY Load Kayak onto J-Cradles (On Car)?

  • Attach the J Rack to the roof of your car
  • Make sure that it is securely in place before moving on to the next step
  • Place the kayak on top of the J Rack, lining up the straps with the holes on the rack
  • Securely strap down the kayak, making sure that it is not going to move around while you are driving
  • Drive carefully to your destination, keeping an eye on the kayak to make sure that it does not come loose from the rack

How to Load 2 Kayaks on J Rack?

If you have two kayaks and want to transport them using a J-style roof rack, there are a few things you need to know.

First, you’ll need to find a set of crossbars that fit your vehicle. Most vehicles have factory-installed crossbars, but if yours doesn’t, there are many aftermarket options available.

Once you have your crossbars, make sure they’re spaced wide enough apart to accommodate your kayaks.

Next, choose the right J-rack for your needs. There are many different styles and brands of J-racks on the market, so do some research to find the one that’s best for you.

Be sure to consider how easy it is to use and how well it will protect your kayaks during transport.

Finally, follow these steps to load your kayaks onto the J-rack:

  • Place one end of each kayak onto a crossbar,
  • Lift the other end of each kayak and rest it on the other crossbar (the weight should be evenly distributed).
  • Use tie-downs or straps to secure each kayak in place. That’s all there is to it!

With proper preparation and care, loading two kayaks onto a J-rack is easy peasy.

Kayak Loader for J Rack

If you’re an avid kayaker, then you know the importance of having a good kayak rack. But finding a quality kayak rack can be tricky, especially if you don’t want to spend a lot of money. That’s where the Kayak Loader for J Rack comes in.

This innovative and affordable product makes it easy to transport your kayak from one place to another, without all the hassle.

The Kayak Loader for J Rack is made out of durable aluminum and can accommodate up to two kayaks at once. It also features rubber cradles that will keep your kayaks secure during transportation.

Plus, the entire unit folds down when not in use, so it won’t take up a lot of space in your garage or shed. Installing the Kayak Loader for J Rack is quick and easy, and it comes with all the necessary hardware.

Once installed, simply load your kayaks onto the rack and tie them down securely. Then just hit the road! Whether you’re headed to the lake or downriver, this kayak Loader will make transporting your kayaks a breeze.

How Do You Load a Kayak on a Suv J Rack by Yourself?

If you’re like most people, loading a kayak onto your SUV by yourself is probably not something you do every day. But if you find yourself in this situation, don’t worry!

Here’s a step-by-step guide to help you get your kayak safely loaded and secured onto your vehicle.

1. Start by positioning the kayak right side up on the ground next to your vehicle. If possible, try to place it on a soft surface to avoid damaging the hull.

2. Once the kayak is in position, open up the J-rack arms and rest them on either side of the hull. Make sure that the Kayak is far enough forward so that when you lift it, the stern (back end) of the Kayak clears the back of your vehicle.

3. With your hands on either side of the cockpit, slowly lift the Kayak straight up and slide it onto the J-rack pads. Pay close attention to how much pressure you’re putting on each side so that the Kayak doesn’t become unbalanced and fall off.

4. To secure TheKayak in place, first tighten down The front strap around The bow (front) of the kayak just behind The cockpit opening. Then take the rear strap and thread it through the space between The J-rack arms and around the stern (back) of the kayak before tightening it down as well..

For extra security, some people also like to loop the straps through themselves or use Camlock buckles instead of traditional knots.

And that’s it!

Easy Way to Load Kayak on J Hooks

There are many different ways to load a kayak onto your vehicle, but one of the easiest is by using J hooks. This method is quick and easy, and it doesn’t require any special equipment. All you need is a set of J hooks and a few straps to secure the kayak in place.

To start, position the kayak so that the bow (front) is facing towards the front of the vehicle. Then, take one of the J hooks and hook it over the top edge of the kayak, just behind the cockpit. Do the same with the other J hook, making sure that both hooks are securely in place.

Once both hooks are in place, take a strap and loop it around both J hooks. Pull tight and secure in place. Repeat this process with another strap, looping it around both J hooks and securing tightly.

With both straps secured, your kayak is now ready to be loaded onto your vehicle. Simply lift up on one end of the kayak and slide it onto your roof rack or trailer hitch. Make sure that the kayak is secure before driving off!

How to Put Kayak on Top of SUV?

Assuming you don’t have a roof rack, the easiest way to put a kayak on top of an SUV is with two people. Have one person hold the kayak while the other person grabs each end and lifts it onto the vehicle. If you’re struggling, try wiggling the kayak until it’s in position.

Once it’s on top, use straps or rope to secure it in place. If you’re traveling solo, there are a few ways you can still get your kayak on top of your SUV. One option is to use a set of wheel chocks.

Place them under the front and back wheels of your kayak, then roll the vessel up onto its side so that you can lift it from there. Another possibility is to invest in a pair of J-style or block carrier racks. These will enable you to load your kayak by yourself without any trouble.

No matter how you do it, be sure to take all necessary precautions when loading a kayak onto an SUV – both for your safety and for the safety of others on the road!


So there you have it – a step-by-step guide on how to load your kayak onto a J Rack. By following these simple steps.

You can save yourself the hassle and backache of trying to lift your kayak up onto the roof of your car. Just make sure you practice at home before taking your new loading skills out on the open road!