How to Get Mildew Off Boat Seats?

Last Updated on September 3, 2022

Mildew can be a real pain to get rid of, especially if it’s taken hold of your boat seats. Fortunately, there are a few methods you can try to get the mildew off and restore your seats to their former glory. 

If you’ve got mildew on your boat seats, there are a few things you can do to get rid of it. One of them is to simply scrub the affected areas with a brush and soapy water.

We’ll go over different methods for getting mildew off boat seats—including using vinegar, bleach, and baking soda. We’ll also provide some tips for preventing mildew from growing in the first place. Keep reading to learn more!

How to clean vinyl boat seats?

  • Begin by brushing the mildewed areas with a stiff-bristled brush to loosen the spores.
  • Mix a solution of one part bleach to four parts water in a bucket and apply it to the seats with a sponge.
  • Scrub the seats vigorously with the sponge until all of the mildew is removed.
  • Rinse the seats well with clean water and allow them to dry completely in the sun before using them again.

Best Mildew Remover for Boat Seats

Assuming you are talking about removing mildew from boat seats made of vinyl.

There are a few things you will need: 

  • Mildew cleaner (Lysol Mold and Mildew Blaster is a good option)
  • A scrub brush 
  • A bucket -Warm water
  • A towel. 


1. Fill your bucket with warm water and add in the recommended amount of mildew cleaner.

2. Submerge your scrub brush in the mixture and then start scrubbing the affected areas of your boat seat. Be sure to do this gently so as not to damage the vinyl. 

3. Once you have gone over the entire seat, rinse it off with clean water to remove any leftover residue from the cleaner.

4. Use your towel to dry off the seat completely before sitting on it or putting any covers back on.

How to Prevent Mildew on Boat Seats?

If you own a boat, you know that mildew can be a big problem. Not only is it unsightly, but it can also be dangerous to your health. 

Mildew is a type of fungus that thrives in moist environments and can cause respiratory problems in humans. It’s important to take steps to prevent mildew growth on your boat seats.

And there are a few things you can do to help. 

First, make sure that your boat seats are dry before storing them for the season. If they’re wet, mildew will have an easier time taking hold. You can use a fan or dehumidifier to help speed up the drying process. 

Now, that your seats are dry, apply a marine-grade anti-mildew treatment. This will create a barrier to future mildew growth. Be sure to follow the instructions on the product label carefully. 

Finally, keep your boat clean and free of debris where mildew could potentially grow. Wipe down surfaces regularly and vacuum any carpeted areas frequently.

By taking these simple steps, you’ll help keep your boat mildew-free all season long!

Homemade Vinyl Cleaner for Boat Seats

If you have vinyl boat seats, you know how difficult it can be to keep them clean. The sun and the water take their toll, leaving your seats looking dull and faded. But there’s no need to buy expensive cleaners when you can make your own at home.

All you need is a little dish soap, some vinegar, and some water. Mix together equal parts of each ingredient in a bucket or bowl, then use a sponge or brush to scrub down your seats. Rinse with clean water when you’re done and admire the like-new shine on your vinyl!

Will Simple Green Remove Mildew from Boat Seats?

Assuming you are talking about Simple Green All-Purpose Cleaner: Yes, Simple Green All-Purpose Cleaner will remove mildew from boat seats. In fact, it can be used on a variety of surfaces to remove stubborn dirt, grime, and stains including mildew.

Simply spray the affected area and wipe it clean with a damp cloth. For best results, use on a sunny day so that the area can dry completely afterward.

What is the Best Cleaner for Mildew on Boat Seats?

If you own a boat, chances are you’ve had to deal with mildew at some point. Not only is it unsightly, but it can also be difficult to remove. While there are a number of commercial cleaners on the market specifically designed for mildew, you can also use household items to get the job done.

One of the most effective cleaners for mildew is bleach. Simply mix one part bleach with three parts water and scrub the affected area with a sponge or brush. Let it sit for a few minutes before rinsing it off with clean water.

You may need to repeat this process a few times to completely remove the mildew. Another option is vinegar. Mix equal parts vinegar and water in a spray bottle and spritz the affected area.

Let it sit for about an hour before scrubbing with a brush or sponge and rinsing off with clean water. If you’re looking for something more natural, try lemon juice. Just like vinegar, mix lemon juice and water in a ratio of 1:1 and spray on the mildewed area.

Let it sit for an hour or so before scrubbing away with a brush or sponge. Rinse thoroughly afterward.

How to Clean Mildew off Jet Ski Seat?

If you’re lucky enough to live near the water, then you probably have a jet ski or two. And if you have a jet ski, then you know that they can be a pain to keep clean – especially the seat. 

The good news is that there are some easy ways to get rid of mildew on your jet ski seat, and we’re here to share them with you!

First things first, you’ll need to gather up some supplies. For this project, you’ll need bleach, a scrub brush, a hose, and some elbow grease. Once you have everything together, it’s time to get started!

Begin by mixing up a solution of one part bleach with ten parts water. Next, use your scrub brush to apply the solution directly onto the affected areas of your jet ski seat. Let the mixture sit for about five minutes before rinsing it off with your hose.

Once all of the bleach has been rinsed away, take a look at your seat. If there are still some stubborn mildew stains remaining, simply repeat the process until they’re gone. 

When you’re satisfied with the results, allow your seat to air dry in the sun before using your jet ski again.

And there you have it – now you know how to easily clean mildew off of your jet ski seat!

Cleaning Boat Seats With Vinegar

If you’re like most boat owners, you want to keep your vessel in tip-top shape. That means taking care of the little details, like keeping the upholstery clean. Over time, saltwater and sun can take their toll on boat seats, making them look dingy and worn.

But with a little elbow grease and some household staples, you can get them looking like new again. One of the best ways to clean boat seats is with vinegar. Vinegar is a natural disinfectant and will help remove any mildew or mold that may be growing on the fabric.

It’s also great for getting rid of stubborn stains. To clean your seats with vinegar, simply mix equal parts vinegar and water in a spray bottle and spritz generously onto the affected areas. Let it sit for a few minutes before scrubbing with a brush or sponge.

Rinse well and allow to dry completely in the sun before using again. If you have more serious stains or mildew growth, you may need to use full-strength vinegar. Be sure to test a small area first to ensure that the fabric can handle it without damage.

Cleaning Boat Seats With Magic Eraser

For boaters, one of the most important pieces of equipment is the boat seat. Not only do boat seats provide a comfortable place to relax and enjoy the ride, but they also help to protect against the elements. 

However, over time, boat seats can become stained and damaged by sun, salt, and weather. One way to clean and protect boat seats is to use a Magic Eraser. Magic Erasers are made from a unique foam that is able to penetrate and lift away stains. 

In addition, they are effective at removing grime and dirt from surfaces. To use a Magic Eraser on boat seats, simply dampen the sponge with water and rub it over the affected areas. 

For best results, be sure to follow up with a coat of Boat Seat Protector. Using a Magic Eraser to clean boat seats is an easy and effective way to keep your boat looking its best.

Hydrogen Peroxide on Boat Seats

If you’re like most boaters, you spend a lot of time and effort making sure your boat looks its best. But what about protecting your investment? One way to do that is by using hydrogen peroxide on your boat seats.

Hydrogen peroxide is a powerful oxidizer that can help remove stains and mildew from fabric. It’s also effective at killing mold and mildew spores, which can cause serious damage to your boat’s upholstery. To use hydrogen peroxide on your boat seats, simply mix equal parts of water and hydrogen peroxide in a spray bottle.

Then mist the solution onto the affected areas and let it sit for several minutes before wiping it away with a clean cloth. For tougher stains, you may need to apply the solution more than once. But be careful not to overdo it, as hydrogen peroxide can bleach fabrics if used too frequently or in high concentrations.

How to Get Mildew Off Boat Seats?

What Will Take Mold off of Boat Seats?

Assuming you want to remove mold from your boat seats, there are a few things you can do. One option is to use a vinegar and water solution. Simply mix equal parts of each in a bowl and apply it to the affected areas with a sponge or cloth.

Let it sit for about an hour before scrubbing the area with a brush. Rinse with clean water and let the seat dry completely in the sun. Another option is to make a paste out of baking soda and water.

Apply this paste to the moldy areas and let it sit for 30 minutes before scrubbing away with a brush. Rinse well afterward. You can also add some essential oils to this mixture for extra cleaning power and a pleasant scent.

If you have more stubborn mold, you may need to resort to using bleach. Be sure to wear gloves when handling bleach and always diluted it with water (1 part bleach: 10 parts water).

Apply the mixture directly to the moldy areas, scrub if necessary, then rinse thoroughly afterward. Let the seat dry completely in direct sunlight before using it again.

Will Vinegar Remove Mold from Boat Seats?

If you’re dealing with mold on your boat seats, you may be wondering if vinegar is an effective solution. The answer is yes and no. Vinegar can kill some types of mold, but it won’t kill all types and it won’t remove the mold spores from surfaces.

So, while vinegar can be helpful in preventing mold growth, it’s not a cure-all. There are many different types of mold and each type responds differently to vinegar. Some molds are actually resistant to vinegar’s acidic properties.

And even for molds that are killed by vinegar, the spores often remain behind and can quickly re-grow if conditions are favorable (i.e., there’s moisture present). So, while vinegar may help to control mold growth on your boat seats (or other surfaces), it’s not a guarantee that the problem will go away completely or forever.

If you’re concerned about mold on your boat seats (or any other surface), it’s best to consult with a professional who can assess the situation and recommend the best course of action.

How Do You Remove Mold From Vinyl Seats?

If you have vinyl seats that have become moldy, there are a few things you can do to clean them. First, mix equal parts water and vinegar in a spray bottle and mist the affected area. Then, use a scrub brush or sponge to wipe away the mold.

If the mold is stubborn, you may need to use a stronger cleaner like bleach. Be sure to test any cleaner on an inconspicuous spot first to make sure it won’t damage the vinyl. Once the mold is gone, dry the area with a clean towel and then vacuum up any remaining dirt or debris.


Mildew is a type of fungus that can grow on various surfaces, including boat seats. In order to remove mildew from your boat seats, you will need to clean the affected area with a disinfectant and then rinse it off with water. 

If the mildew has been allowed to sit for a long time, it may be necessary to use a stronger chemical cleaner in addition to the disinfectant. 

By following the given methods, you should be able to remove the mildew from your boat seats and restore them to their original condition.