How to Drain Pelican Kayak?
Last Updated on October 16, 2022
If you have a Pelican kayak, you may eventually need to drain it for storage or transportation. Here’s how to do it: First, remove the plug from the hull of the kayak. Next, tip the kayak over so that the water can drained out.
You may need to help it along by tilting it back and forth. Finally, replace the plug and your kayak is ready to be stored or transported!
- Open the drain plug on the bottom of the kayak
- Hold the kayak upside down over a bucket or similar container
- allow all the water to drain out of the kayak
- Once all the water is out, close the drain plug and store or use your kayak as usual
How Do You Drain Water Out of a Kayak?
Assuming you need to drain the water for storage or transport, there are a few ways to do this. If your kayak has a plug near the stern (back end), simply open it and allow the water to drain out. Some kayaks have multiple plugs, so be sure to check before draining.
You can also tip the kayak over on its side and allow the water to pour out that way. Another method is to use a small bilge pump, which is designed specifically for removing water from boats. Simply insert the hose into the kayak and turn on the pump.
Where is the Drain Plug on a Kayak?
The drain plug on a kayak is located at the stern of the kayak, near the back end. In order to access it, you will need to remove the seat and any other gear that is blocking your way. Once you have access to the drain plug, simply unscrew it and allow the water to drain out.
What are the Holes in a Pelican Kayak For?
Pelican kayaks are designed with several different types of holes in order to provide the best possible experience for the user. The most common type of hole found in a Pelican kayak is the drain hole, which helps to prevent water from building up inside the kayak and making it difficult to paddle. Additionally, there are often scupper holes located near the bottom of the kayak, which allow water that has seeped in through the hull to drain out again.
Finally, some Pelican kayaks also feature accessory mounts that can be used to attach gear or other items to the outside of the kayak.
Do All Kayaks Have a Drain Plug?
No, not all kayaks have a drain plug. Some kayaks have a bulkhead with a sealed hatch that can be used for storage and will keep water out even if the kayak capsizes. Others have an open cockpit design which doesn’t require a drain plug because any water that gets in can just drain out through the opening.
Many kayakers also choose to drill their own drainage holes to add plugs to their kayaks.
How-to-Use our Drain Plugs
Conclusion
Draining your kayak is important to do after every time you use it, especially if you plan on storing it for a while. Here are the steps to follow to properly drain your kayak:1. First, remove all of the plugs from the kayak.
These are usually located at the front and back of the kayak.2. Next, tip the kayak over so that the cockpit is facing downwards.3. Now, using a garden hose or other water source, slowly fill up the cockpit with water until it is about halfway full.4.
Once the cockpit is filled with water, take a cup or bucket and scoop out some of the water from inside the kayak and pour it over the top of the cockpit rim. This will help to loosen any debris that may be stuck to the sides of the cockpit.5.
