How to Cover Pontoon Boat Seats?

Last Updated on October 16, 2022

Pontoon boat seats can take a beating from the sun and weather. Over time, the fabric can start to fade and crack. To prolong the life of your pontoon boat seats, it’s important to cover them when they’re not in use.

There are a few different ways you can go about covering pontoon boat seats. You can use a tarp, a canvas cover, or even an old sheet.

  • Remove the old fabric from the seats
  • This can be done by cutting it away with a sharp knife or by pulling it off with pliers
  • Clean the seat surface to remove any dirt, grime, or mildew
  • A power washer can be used for this step, but be careful not to damage the wood beneath the fabric
  • Cut new fabric to size and shape using the old fabric as a template
  • Be sure to add an extra inch or two all around for seam allowance
  • Sew the new fabric in place, being sure to reinforce all of the seams well
  • A sewing machine will make this task much easier, but it can be done by hand if necessary
  • 5a) For tufted seats, cut small holes in the top layer of fabric at regular intervals and insert buttons through to the bottom layer of fabric
  • Sew the buttons in place securely
  • 5b) For non-tufted seats, simply lay the top layer of fabric over the bottom layer and sew them together along all four sides

Recovering Boat Seats On A Budget

How Do You Cover Boat Seats Without Sewing?

Boat seats can be a pain to keep clean and protected from the elements. You can buy seat covers that are made specifically for boats, or you can make your own. If you’re handy with a sewing machine, you can make covers that will fit snugly over your boat seats and look great.

But what if you don’t know how to sew? Or what if you don’t have the time to make covers yourself? There are a few ways to cover boat seats without sewing.

One option is to use Velcro strips. You can attach these strips around the edges of your seat cushions and then slip the covers on and off as needed. Another option is to use bungee cords.

These cords can be looped around the edges of your seat cushions and then tied in place. Both of these methods will keep your seat covers securely in place without requiring any sewing. If you want something that looks a bit more finished, you can use fabric glue or adhesive tape to attach fabric panels to your seat cushions.

This method does require some patience, but it’s not difficult and it doesn’t require any sewing. Simply cut the fabric panels to size, apply the adhesive, and press them into place around the edges of your seat cushions. Allow the adhesive to dry completely before using your boat seats again.

With a little bit of creativity, it’s easy to cover boat seats without sewing a single stitch!

How Much Does It Cost to Cover Boat Seats?

The cost of covering boat seats can vary depending on the size and type of boat, as well as the fabric used. Generally, you can expect to pay anywhere from $50 to $200 per seat. If you’re looking for a basic seat cover, you can expect to pay around $50.

This will usually be made from a vinyl or polyester material, and won’t include any fancy features like padding or insulation. If you want something a little more durable and weather-resistant, you’ll need to spend closer to $100. Materials like neoprene or Sunbrella are a good choice for this purpose.

You may also want to consider adding some padding for comfort. For the ultimate in luxury and protection, you can expect to pay upwards of $200 per seat. Leather is the most popular choice for high-end covers, but there are also options available in suede and other materials.

These covers often come with additional features like built-in storage pockets or cup holders.

How Much Does It Cost to Get a Pontoon Seat Upholstery?

If you’re looking to replace the upholstery on your pontoon’s seats, you might be wondering how much it will cost. The good news is that there are a lot of options available, so you can find something that fits your budget. Here’s a look at some things to consider when pricing out pontoon seat upholstery:

– The type of fabric: There are a variety of fabrics available, from vinyl to marine-grade fabric. The price will vary depending on the type of fabric you choose. – The size of the seats: Obviously, the bigger the seats, the more fabric you’ll need and the higher the price will be.

– The number of seats: If you have a lot of seating on your pontoon, you’ll obviously need more fabric and will end up paying more overall. – Any special features: If you want embroidery or other custom work done on your upholstery, that will add to the cost. In general, you can expect to pay anywhere from $50 to $200 per seat for new upholstery.

So, if you have a 10-seat pontoon with standard vinyl upholstery, you could be looking at a bill of $500 to $2,000 for all new seat covers. Of course, if you shop around and find some good deals on fabric and labor, you could end up spending less.

How Do You Cover a Boat Seat With Vinyl?

If you’ve ever had a boat seat that’s seen better days, you may have considered reupholstering it. But did you know that you can actually give it new life with some fresh vinyl? It’s true!

Covering a boat seat with vinyl is not only an inexpensive way to update the look of your vessel, but it’s also a relatively easy project to do yourself. Here’s how: First, remove the old fabric from the seat.

You’ll need to use a utility knife or scissors to cut through any staples or adhesive holding the fabric in place. Once the fabric is removed, inspect the seat for any damage. If there are any holes or tears in the foam beneath the fabric, patch them up with some marine-grade filler before proceeding.

Next, lay out your new piece of vinyl on a flat surface and position the seat on top of it. Trace around the perimeter of the seat onto the vinyl so you’ll know where to cut. Then, using a sharp pair of scissors or a razor blade, carefully cut out your new piece of vinyl.

Now it’s time to attach the vinyl to the seat. You can do this by either sewing it in place or using an adhesive spray designed for use on fabrics (just be sure to follow all manufacturer instructions). If you’re sewing, be sure to use marine-grade thread so it doesn’t rot away quickly when exposed to water and sun.

Once your new piece of vinyl is in place, replace any screws or fasteners that held on the old fabric and admire your handiwork! With just a little bit of effort, you’ve given your boat seat a whole new lease on life – and saved yourself some money in the process.

How to Reupholster Boat Seats Without Sewing

Reupholstering boat seats doesn’t have to be a difficult or time-consuming task – and you don’t need to know how to sew! With a few simple tools and some basic instructions, you can give your boat’s seating a fresh, new look in no time. Here’s what you’ll need:

– Fabric of your choice (enough to cover all of your boat’s seats) – Scissors – A stapler and staples

– A utility knife or box cutter – Foam padding (optional) First, remove the old fabric from your boat seats.

This is usually just a matter of pulling it away from the seat base. If it’s attached with staples, use a pair of pliers to remove them. Once the old fabric is off, carefully inspect the seat base for any damage that may need to be repaired before proceeding.

Next, cut your new fabric to size. If you’re using foam padding, cut it to fit as well and staple it in place on the seat base. Then, simply wrap the fabric around the seat base and staple it in place on the underside.

Trim away any excess fabric with a utility knife or box cutter, being careful not to damage the underlying foam or wood. That’s it! You’ve successfully reupholstered your boat seats without sewing a single stitch!

Pontoon Seat Covers for Damaged Seats

If you have a pontoon boat, you know how important it is to keep the seats in good condition. But sometimes, despite your best efforts, the seats can become damaged. Whether from sun exposure, spills, or just wear and tear, damage to your pontoon seats can ruin the look of your boat and make it uncomfortable to sit on.

That’s where pontoon seat covers come in. These covers are designed to protect your seats from damage while still allowing you to enjoy the comfort of your pontoon boat. Pontoon seat covers come in a variety of materials, so you can choose one that best suits your needs.

Some are made from waterproof materials like PVC, which is great for protecting against spills and stains. Others are made from UV-resistant materials like canvas, which helps keep the seats from fading in the sun. And some even come with padding for added comfort.

No matter what material you choose, pontoon seat covers are an easy way to keep your seats looking like new for years to come. So if you’re looking for a way to protect your investment and extend the life of your pontoon boat’s upholstery, consider adding some seat covers to your shopping list!

Pontoon Boat Seats Clearance

When it comes to pontoon boat seats, clearance is key. This is especially true if you plan on fishing from your pontoon boat. You need to be able to move around easily and have enough space to cast your line without getting tangled up in chairs or other obstacles.

The best way to achieve this is to choose pontoon boat seats that are low-profile and have a small footprint. There are many different styles of seats available, so take some time to browse and find the ones that will work best for your needs. Pay attention to the height of the seat backs as well as the width of the seat itself.

You want something that will be comfortable but won’t get in the way when you’re trying to fish. Another important factor to consider is how easy it will be to get in and out of your pontoon boat seats. If you have elderly passengers or young children, you’ll want something that they can easily enter and exit without assistance.

Likewise, if you’re frequently changing bait or lures, you’ll want something that allows you to do so quickly and without hassle. Consider all of these factors before making your final decision on pontoon boat seats and you’ll be sure to find the perfect option for your needs!


If you have a pontoon boat, you know that the seats can take a beating from the sun and weather. But there are ways to protect your seats and keep them looking good for years to come. Here are some tips on how to cover pontoon boat seats:

1. Use marine-grade fabric for your seat covers. This type of fabric is designed to withstand the elements and will last longer than other types of fabrics. 2. Make sure the covers fit snugly on the seats.

loose covers can flap in the wind and eventually tear or come off completely. 3. Choose a color that will complement your boat’s hull and decking. darker colors tend to fade less than lighter colors in sunlight.

4. If possible, remove the covers when you’re not using the pontoon boat so they don’t get dirty or stained unnecessarily. 5. Clean the covers regularly with soap and water (or a mild detergent) to remove any dirt, salt, or pollen that might be on them.