How to Build Seats for a Pontoon Boat?

Last Updated on October 16, 2022

Building seats for a pontoon boat is not as difficult as it may seem. With a little bit of planning and some basic carpentry skills, you can easily build your own custom seats. Here are some tips on how to build seats for a pontoon boat:

1. Decide on the size and shape of the seats. Pontoon boats typically have two or three rows of seating, so you’ll need to decide how many seats you want and what size and shape they should be. 2. Cut the plywood pieces for the seat bases and backs using a circular saw.

Make sure all the pieces are cut to exactly the same size so that they fit together perfectly when assembled. 3. Assemble the seat bases and backs by screwing or nailing them together. Use L-brackets at each corner to reinforce the joints if desired.

4. Cover the seat bases and backs with marine-grade vinyl fabric using a staple gun or upholstery tacks/nails. Make sure that the fabric is tight and smooth with no wrinkles or creases before moving on to step five. 5 .

Attach each seat base/back assembly to the pontoon boat deck using screws, washers, and nuts (or bolts).

  • Decide on the size and shape of the seats
  • Pontoon boat seats are typically long and narrow, so they can be positioned close together without taking up too much space on the deck
  • Cut out the seat bases from plywood or marine-grade lumber, using a jigsaw or circular saw
  • The base should be slightly smaller than the seat cushion itself, to allow for proper fitting
  • Attach the seat bases to the pontoon deck using screws or bolts, making sure they are securely fastened
  • If desired, add reinforcement plates underneath the bases for extra strength
  • Install any arm rests or other features onto the seat bases at this time, then cover them with marine-grade vinyl fabric using staples, adhesive spray, or another method of attachment
  • Make sure there are no gaps in coverage to prevent water damage
  • Place the seat cushions onto the vinyl-covered bases and secure them in place using straps, snaps, buttons, or Velcro strips as desired

Can You Add Seats to Pontoon Boat?

Yes, you can add seats to a pontoon boat. You have a few different options when it comes to seating. You can either purchase additional seats that will bolt onto the deck of your pontoon boat or you can get creative and build your own custom seats.

If you’re looking for a more affordable option, adding additional seats that bolt onto the deck is the way to go. You can find these seats at most marine supply stores. They usually come in sets of two and are very easy to install.

If you’re looking for something a little more unique, you can always build your own custom seats. This is a great option if you have specific ideas in mind for how you want your seat to look and function. Building your own custom seats does require some basic carpentry skills, but it’s definitely doable for the average DIYer.

No matter which route you choose, adding additional seating to your pontoon boat is a great way to make it even more enjoyable for everyone on board.

What are Pontoon Boat Seats Made Of?

There are a few different materials that pontoon boat seats can be made from, such as plastic, metal, or wood. However, the most common type of pontoon boat seat is made from a vinyl material. This is because vinyl is a durable material that can withstand harsh weather conditions and repeated use.

Plus, it’s easy to clean and maintain. Vinyl pontoon boat seats are typically filled with foam padding to provide comfort and support. Some seats might also have additional features like built-in cup holders or storage pockets.

When shopping for pontoon boat seats, it’s important to consider the size of the seat and the weight capacity to make sure it will be comfortable and safe for everyone on board.

How Wide are Pontoon Boat Seats?

Pontoon boat seats typically range in width from 18 to 24 inches. The most popular seat width is 20 to 22 inches. Wider seats are generally more comfortable, but they can make it difficult to get in and out of the boat.

Narrower seats are easier to get in and out of, but they may not be as comfortable for long periods of time.

How Do I Add More Seats to My Boat?

Assuming you would like tips on how to add more seats to your boat: One way to add more seating to your boat is by installing additional bench seats. You can purchase pre-made bench seats and install them yourself, or have a professional do it for you.

Another option is to build your own bench seat using lumber and marine-grade plywood. This option will likely be more expensive and time-consuming, but will allow you to customize the size, shape, and look of the seat. Another way to add seating is by installing swivel chairs or captain’s chairs.

These can be bolted or screwed into place, or even just placed on top of an existing bench seat. Swivel chairs offer the advantage of being able to rotate, making it easier to get in and out of the chair. Captain’s chairs are similar, but usually have higher backs and armrests.

If you want a temporary solution or don’t have a lot of space, folding chairs are always an option. Folding chairs can be stored away when not in use, and set up as needed. They come in a variety of materials, including plastic, metal, and wood.

No matter what type of seating you choose, make sure that it is securely fastened so that it does not become a safety hazard while you are out on the water.

How to build your own Boat Furniture

Build Your Own Pontoon Furniture

Pontoon furniture is one of the most important aspects of your pontoon boat. It not only needs to be comfortable, but it also needs to be durable and able to withstand the elements. There are a few different options when it comes to choosing pontoon furniture.

You can either buy pre-made sets or you can build your own. If you choose to build your own, there are a few things you need to keep in mind. First, you need to make sure that the furniture is sturdy.

Pontoon boats are constantly moving around on the water, so any furniture you put on it needs to be able to handle that movement. Second, you need to make sure that the furniture is weather resistant. The sun and the water can take a toll on regular furniture, so it’s important to choose materials that won’t fade or break down over time.

Finally, you want your pontoon furniture to be comfortable. This means choosing cushions and fabrics that feel good and won’t get too hot in the summer sun. Building your own pontoon furniture can save you a lot of money in the long run.

It also allows you to customize your furniture to match the rest of yourboat’s décor . If you’re handy with tools and have some basic carpentry skills, building your own pontoon furniture is a great option for outfitting your boat .

Building a Boat Seat

Building a boat seat is not as difficult as it may sound. With a few tools and some patience, you can easily build a comfortable and stylish seat for your boat. Tools Needed:

-saw (hand or power) -drill -screws (1” to 1-1/2” long)

-staple gun -foam padding (at least 2” thick) -vinyl or marine grade fabric

-buttons or snaps (optional) Instructions: Assuming you have a basic understanding of how to use the above tools, here are the steps for building a boat seat.

These instructions are written for building one single seat, but they can be easily modified for multiple seats. 1. Cut two pieces of plywood to the desired size and shape of your seat using the saw. These will be the front and back pieces of your seat.

2. Place the front piece of plywood on top of the foam padding. Trace around it with a pencil to create an outline of the front piece on the foam. Do the same with the back piece of plywood on another piece of foam.

Then, use a sharp knife to cut out these shapes from the foam so that they fit snugly against the plywood when put together. 3 . Sandwich the Foam between The Plywood Pieces . Place one edge of each cutout foam piece along an edge of each respective plywood piece, then use screws spaced about 6 inches apart along all edges to attach them together . Be sure to pre – drill pilot holes before screwing in , so you don’t split The wood . You can also use glue instead Of screws if preferred . Just be sure that whatever method you choose will securely fasten The three layers together . 4 . Attach Your Fabric Covering : Spread your vinyl or marine – grade fabric over The entire surface Of The newly assembled plywoopd -and – f0am sandwich , making sure there ‘ s enough excess fabric On all sides To wrap around To The underside And secure with staples OR buttons / snaps . Start stapling Or attaching closures at The center front Of The Seat , working your way Outwards And towards The back until Fully covered .

Diy Reupholster Pontoon Boat Seats

If you have old, tattered pontoon boat seats, don’t spend a fortune replacing them! With a little time and effort, you can reupholster them yourself and save big. Here’s how:

Supplies Needed: – Heavy duty upholstery fabric (enough to cover all your seats) – Foam padding (optional – for added comfort)

– Upholstery adhesive or spray glue – Scissors or rotary cutter – Measuring tape or ruler

– Pencil or marker Instructions: 1. Remove the old fabric from your pontoon boat seats.

This may require some disassembly of the seat itself. Be careful not to damage any of the metal parts as you remove the old fabric. 2. Once the old fabric is removed, measure the seat so you know how much new fabric you’ll need to purchase.

Add an extra inch or two all around to allow for trimming and seam allowance. 3. Cut out your new fabric pieces using scissors or a rotary cutter. If adding foam padding, cut that to size as well and set it aside for now.


Pontoon Seats

Pontoon seats are an essential component of any pontoon boat. Without them, you would have nowhere to sit while enjoying a day out on the water. Pontoon seats come in a variety of different styles and colors, so you can find the perfect ones to match your personal taste and the look of your boat.

Whether you’re looking for traditional bench-style seats or something more modern like bucket seats, there are plenty of options to choose from. When it comes to pontoon seats, comfort is key. You’ll want to make sure that you select seats that are made from high-quality materials that will withstand extended use.

UV-resistant fabrics are a good choice for pontoon seating since they won’t fade in the sun and will hold up well against moisture. If you plan on using your pontoon boat for fishing or other activities that involve being in the water, consider opting for vinyl seat covers which are easy to wipe down and keep clean. One final thing to keep in mind when shopping for pontoon seats is whether or not you want storage beneath them.

Many styles of pontoon seating come with built-in storage compartments underneath the cushions – perfect for stowing away life jackets, coolers, and other gear. This can be a great way to maximize space on your boat and keep everything organized and within reach.


If you’re lucky enough to have a pontoon boat, you probably want to spend as much time on it as possible. But if your boat doesn’t have any seats, it can be pretty uncomfortable. In this post, we’ll show you how to build some simple yet effective seats for your pontoon boat.

First, you’ll need some materials. For the seat base, you can use either plywood or marine-grade lumber. If you’re using plywood, make sure it’s at least 3/4 inch thick so it’s sturdy enough to support people sitting on it.

You’ll also need some foam padding and upholstery fabric. Once you have your materials, cut the plywood or lumber into pieces that will fit snugly against the pontoon boat’s rails. Attach the pieces together with screws or bolts, making sure they’re secured well.

Now it’s time to add the foam padding and upholstery fabric. Start by attaching the foam padding to the seat base with spray adhesive or staples. Then lay out your fabric and cut it to size, leaving about 2 inches of excess all around.

Wrap the fabric around the seat and staple or glue it in place. Trim off any excess fabric and voila! You now have a custom-made seat for your pontoon boat!