How Does a Livewell Work on a Bass Boat?

Last Updated on October 16, 2022

A livewell is a tank on a bass boat that is used to keep the catch alive. The livewell is usually filled with fresh water and has an aerator to keep the water oxygenated. The aerator also circulates the water so that it does not become stagnant.

If you’re a bass fisherman, then you know that having a livewell on your boat is essential. But how does a livewell work? A livewell is simply a tank of water that is used to keep fish alive after they are caught.

The water in the livewell must be constantly aerated and filtered in order to keep the fish healthy. Bass boat livewells are typically located in the stern (rear) of the boat so that they don’t take up too much space. There are two types oflivewells – recirculating and circulating.

Recirculating livewells recirculate the same water over and over again, while circulating livewells pump fresh water into the tank as needed. Both types of livewells need to have an aerator and filter system in place in order to keep the fish healthy. So, there you have it!

That’s how a livewell works on a bass boat. Now you can impress your fishing buddies with your knowledge next time you’re out on the lake!


How Do You Use a Livewell on a Bass Boat?

A livewell is a tank of water used to keep fish alive and fresh until they are ready to be released or cleaned. Most livewells are aerated, meaning they have a bubbler or some other device to add oxygen to the water. This is necessary because fish breathe oxygen just like we do, and without it, they will suffocate and die.

There are two main types of livewells: recirculating and circulating. Recirculating livewells constantly cycle the water through a filter to remove waste and replenish oxygen. Circulating livewells circulate the water but do not filter it, so they must be frequently emptied and refilled with fresh water.

To use a livewell, simply fill it with clean water (if using a recirculating livewell, be sure to add the correct amount of dechlorinator) and turn on the aeration system. Then gently place your catch into the well – taking care not to overcrowd it – making sure that each fish has enough room to swim around freely. It is important to check yourlivewell regularlyto ensure that the pH level, ammonia levels and temperature are all within safe limits for the fish.

If not, take steps to adjust as needed. Also, be sure to empty and clean yourlivewell periodicallyto prevent diseases from spreading among the fish population inside.

How Do You Keep Bass Alive in a Livewell?

It’s no secret that the hot summer sun can take its toll on bass in a livewell. Here are some tips to help keep your catch alive and healthy during those long days on the water. First, make sure you have a good aerator.

A quality aerator will keep the oxygen levels high in the livewell, which is crucial for keeping fish alive. Second, use ice in the livewell. This will help keep the water temperature down, which is also important for Bass health.

Third, avoid overcrowding the livewell. If possible, use two smaller livewells instead of one large one so that the fish have more room to move around and stay healthy. Fourth, if you’re using a bait tank, make sure it has plenty of aeration as well.

Baitfish need oxygen just like Bass do, so an aerated bait tank is a must. Finally, remember to check yourlivewells regularly during long days on the water. If the oxygen levels get low or the water gets too warm, add more ice or swap out the water for fresh from time to time to keep your catch alive and healthy all day long!

How Does the Live Well Work on a Boat?

Most boats have a live well, which is a compartment that holds live bait. The live well has a pump that recirculates water and oxygenates the water to keep the bait alive.

Do You Leave Livewell Pump On?

If you’re a bass fisherman, the answer is most likely yes. A livewell is a tank of water used to keep your catch alive and fresh. The livewell pump circulates the water and keeps it oxygenated so your fish stay healthy.

How to Fill Livewell on Boat

If you’re like most boaters, you enjoy spending time out on the water with friends and family. But in order to have a successful day of fishing, you need to make sure your livewell is properly filled. Here’s a quick guide on how to fill your livewell so you can get started fishing as soon as possible:

To start, find a clean water source. This could be a lake, river, or even the ocean if you’re close enough. Once you’ve found a good spot, it’s time to start filling up your livewell.

Attach a hose to your boat’s livewell and turn on the water until it’s full. Make sure the hose is secure so there are no leaks. If everything looks good, turn off the water and give your livewell a test by adding some baitfish or other small fish.

Once you’ve confirmed that your livewell is functioning properly, it’s time to head out onto the open waters!

How Does a Recirculating Livewell Work

A recirculating livewell is a great way to keep your bait or catch alive and healthy while you’re out on the water. But how does it work? Here’s a quick rundown:

Water is drawn into the livewell via an inlet, which is typically located at the bottom of the unit. A pump then circulates the water through a series of filters to remove any debris or pollutants. The filtered water is then returned to the livewell via outlet holes located around the top of the unit.

This continuous flow of fresh, oxygenated water keeps your bait or catch alive and healthy for extended periods of time.

How to Empty Livewell on Boat

If you’ve ever gone fishing on a boat, chances are you’ve used a livewell. A livewell is a holding tank that keeps your catch alive and fresh until you’re ready to clean and cook them. But what do you do when it’s time to empty the livewell?

Here’s a step-by-step guide on how to empty your livewell: 1. Start by turning off the aerator. The aerator is what keeps the water circulating and oxygenated, so you’ll want to turn it off before draining the livewell.

2. Next, open up the drain plug at the bottom of the livewell. Make sure that the plug is fully open so that all of the water can drain out. 3. Now it’s time to start pumping out the water.

You can use a hand pump or an electric bilge pump for this step. If you’re using a hand pump, be sure to prime it first by adding some water to the top of the pump before attaching it to thelivewell drain hose . Once everything is set up, start pumping out the water until the live well is completely empty .

4. Once all ofthe water has been pumped out , closethe drain plug and turnthe aerator back on . This will help keep any fish that are still in there alive and fresh until you’re readyto clean them .


A livewell is a holding tank on a bass boat used to keep fish alive. The livewell circulates water and oxygen to the fish, keeping them fresh and healthy until it’s time to clean them.